AS IS is not good enough!
Before pushing the dowels in to the holes on the end blocks:
PUSH at the same time:
DD of the caned shelf into DD of the leg frame
BB of the caned shelf into BB of the leg frame
You can do this by putting the flag frame on the floor, DD BB holes facing up
And Then gently tap DD and BB of the shelf in place.
BUT DO NOT PUSH THE OTHER SIDE OF THE CANED SHELF IN TO THE LEG FRAME YET.
NOW carefully pushing the leg frame with one side of the caned shelf attached into place
The Teak table top banding is generous and in great condition with desirable patina.
WITH bubble wrap on, put the flat side facing the floor
Discard loose paper and foam cushioning materials.
Slowly cut the bubble wrap off, until you can arrange the pieces like this:
First, put the end blocks on, by lining the holes with the dowels, and only using your hand, to push the dowels in to the hole
Trioh Mobler Teak and Cane Two-tier Coffee Table
Made in Denmark
A Near perfect Peter Hvidt for John Stuart Danish Solid Teak End Table
Item # 160213 C
$550
Solid Teak is in amazing condition and displays beautiful grains.
Measurements:
L=W: 18"; H 15 3/4
I hope your assembly is successful.
Please let me know if you have questions.
Enjoy the table!
They should look like this:
Do the same to the other side
NEXT:
Use the Allen key wrench provided to tighten the four screws. Please do not over tighten.
Before posing the dowels in to the holes on the end blocks:
NEXT:
Carefully line up the other side the leg frame with:
The holes on the end block
The caned shelf
Tap gently until no dowels can be seen.